TECHTOP MS1/MS2 Series - Machine Weight

LOW VOLTAGE MOTORS - Installation, operation, maintenance and safety manual - rev. 01 - 1.07.2016
6
2.4 Machine weight
The total machine weight can vary within the same frame size (center height) depending on different output, mounting arrangement and auxiliaries.
The following table shows estimated maximum weights for machines in their basic versions as a function of frame material.
The actual weight of all TECHTOP’s motors is shown on the catalogue.
Frame size
Aluminum
Weight
kg
Cast iron
Weight
kg
56 4
63 5
71 7
80 11 19
90 18 27
100 28 38
112 36 50
132 64 84
160 98 147
180 128 195
200 158 270
225 320
250 427
280 667
315 1270
355 1850
400 3000
450 3800
500 5300