English - 31 -
If you need any assistance or a customer reference number please contact the TECHWOOD help line on 0845 543 0485
MOBIL TV INSTRUCTION MANUAL
Switching the TV On Using 12 Volt
Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to 1.
the battery of car, making sure to observe the correct polarity.
Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights 2.
up.
Press the “3.
” button, P+ / P- or a numeric button on the remote control or press the “ ” button, -P/
CH or P/CH+ button on the TV. The TV will then switch on.
Adjust for best picture through antenna position or set TV channels again if necessary.4.
Switching the TV Off
Press the “1. ” button on the remote control or press the “ ” switch on the TV, so the TV will switch to
standby mode.
Unplug cable connectors and power plugs.2.
ATTENTION: 12 V Input :
V+
V+
V-
V-
00_[GB]_(01-TV)_[VESTEL_UK]_MB60_woypbpr_1900UK_IDTV_BRONZE17_16911LED_10071402_50181340.indd 3100_[GB]_(01-TV)_[VESTEL_UK]_MB60_woypbpr_1900UK_IDTV_BRONZE17_16911LED_10071402_50181340.indd 31 27.12.2010 17:22:0527.12.2010 17:22:05
To Next Page
Loading...
Need help?
General
