Sirio HH Compact
Instruction and maintenance manual
Instruction n° 207 - Rev. 4 datel 19/10/2017
Copyright © 2017TecmecS.r.l. Translated from the ORIGINAL instructions
4 TRANSPORT AND HANDLING
The equipment are packed in special cardboard boxes and transported on pallets.
Each box is labeled with: type of module, code, production order.
The identification label with the symbols, and the risks and residual risks is located on the front side of the
motor module panel.
In case of needs to move an operating equipment please follow the below points:
always operate by following the instruction provided by existing accident prevention regulation
remove the shelf’s, and place all the colorants cans in a appropriated place
place the dispenser on a pallet
move the pallets with appropriated means to the new destination
install the equipment by following the instructions
For movement over long distance, the equipment MUST be packed and secured on pallets, as
when it was delivered.
To Next Page