Sirio HH Compact
Instruction and maintenance manual
Instruction n° 207 - Rev. 4 datel 19/10/2017
Copyright © 2017TecmecS.r.l. Translated from the ORIGINAL instructions
3.3 Working zones
The zones where improper use and not allowed intervention may present risks are the below mentioned :
Operator Zone (front zone: for cans loading and unloading lateral zone: dispensing )
Maintenance Zone (front and rear zone)
3.4 Components and safety devices
The machine is equipped with an emergency button, placed on the control panel.
A pressing action of this button cause an immediately emergency stop, classified as category 0, the power to
the motor will be interrupted, and will interrupt the agitation movement.
Once the emergency situation is resolved, release the emergency button to restore the normal operation:
Release the emergency button
Press the START button
3.5 Residual risks
In spite of precaution adopted in the design of the equipment, to ensure safe use there may be reasonably
foreseeable situation for which it has only been possible to reduce the risk without completely eliminating it.
Injuries and or crushing during the loading and or
unloading of the cans.
Use protective gloves and safety shoes during loading and
unloading of the cans.
Eyes damage due to paint splashes.
Improper actions during the agitation cycle.
Don't load or unload cans during the agitation.
Don't put your hands, or tools/items in the agitation zone
during the normal operation cycle.
The dispenser is designed to handle colorant/pastes of various types. Prior to their use, follow
the instructions, warning and safety instruction on each individual can/package, and on the
data sheet issued by the producer.
OPERATOR ZONE
(DRIVER PROGRAMMING )
OPERATOR ZONE
(LOADING AND UNLOADING )
To Next Page
Loading...