TECNA T-SPOT 110 - User Manual

IT
Art. 3540 T-SPOT 110 – SPOTTER MULTIFUNZIONE PORTATILE, 2,5 kVA
EN
Item 3540 T-SPOT 110 – PORTABLE MULTIFUNCTION SPOTTER, 2.5 kVA
FR
Réf. 3540 T-SPOT 110 – SPOTTER MULTI-FONCTION PORTABLE, 2,5 kVA
DE
Art. 3540 T-SPOT 110 – TRAGBARER SPOTTER-MULTIFUNKTION, 2,5 kVA
ES
Art. 3540 T-SPOT 110 – SPOTTER MULTIFUNCIÓN PORTÁTIL, 2,5 kVA
TECNA S.p.A. - Via Meucci 27 - 40024 Castel S. Pietro Terme - Bologna (Italia)
Pho. +39-051-6954400 - Tel. +39-051-6954410 - Fax +39-051-6954490 - http://www.tecna.net
DOCUMENTO NUMERO:
DOCUMENT NUMBER:
DOCUMENT NUMERO:
DOKUMENT NUMMER:
DOCUMENTO:
MAN 2032
EDIZIONE:
EDITION:
EDITION:
AUFLAGE:
EDICION:
01 / 2013

Summary

Introduction

Symbols

Identification of Welder Main Parts

Technical Features

General Description

Installation

Electric Installation

Details electrical connection requirements and safety precautions for welder installation.

Optional Trolley Installation

Instructions for mounting the machine onto an optional trolley, ensuring proper assembly.

Start-Up

Safety Requirements

Programming

Manual Mode

Operator manually adjusts time and current values for jobs without specific programs.

Time and Current Setting Mode (Synergic)

Recalls preset programs and uses synergic curves for automatic time/current adjustment.

Multifunction Gun

Preparing the Multifunction Gun

Steps to attach accessories, connect cables, and tighten plugs for the multifunction gun.

Remote Adjustment

Using the remote button for program selection, fine adjustments, and resetting errors.

Autostart Adjustment

Activating and adjusting the autostart function for automatic weld initiation on contact.

Ground Cable Connection

Proper connection of the ground cable to the sheet for optimal welding performance.

Straightening of Large Deformations on Body Panels

Using the 3-Tip Star

Procedure for using the 3-tip star electrode for straightening body panels.

Localized Heating with Carbon Electrode

Welding Wavy Wires or Buttonholed Washers

Upsetting

Rivets Welding

Interrupted Weld Check Function

Maintenance

Ordinary Maintenance (Generator)

Routine maintenance for the generator, including cleaning connectors and checking cables.

Ordinary Maintenance (Multifunction Gun)

Routine maintenance for the multifunction gun, focusing on connections and cables.

Extraordinary Maintenance

Procedures for internal welder interventions, only to be performed by skilled technicians.

TECNA T-SPOT 110 Specifications

General

Brand	TECNA
Model	T-SPOT 110
Category	Welding System
Language	English