EasyManua.ls Logo

Tecnam P2008 JC - Pre-flight Inspections

Tecnam P2008 JC
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 4 - 5
Section 4 Normal procedures
PRE-FLIGHT INSPECTIONS
Ed. 1, Rev. 0
3. PRE-FLIGHT INSPECTIONS
Before each flight, it is necessary to carry out a complete aircraft check including a
cabin inspection followed by an external inspection, as below detailed.
3.1. CABIN INSPECTION
A Aircraft documents (ARC, Certificate of Airworthiness, Noise certificate,
Radio COM certificate, AFM): check current and on board
B Weight and balance: calculate (ref. to Section 6)and check within limits
C Safety belts: connected to hard points, check condition
D Ignition key: OFF, key extracted
E Master switch: ON
F Voltmeter: check within the limits
G Lights: all ON, check for operation
H Acoustic stall warning: check for operation
I Master switch: OFF
J Baggage: check first aid kit, ELT, fire extinguisher, luggage secured with
restraint net.

Table of Contents

Other manuals for Tecnam P2008 JC

Related product manuals