TECNICOMAR MINIMAR PLUS - Technical characteristics and spare parts; 9.1 Electrophysical characteristics; 9.2 A typical analysis of produced water

Instructions for the installation, use and maintenance of Tecnicomar watermaker
9-33
9 Technical characteristics and spare parts
9.1 Electrophysical characteristics
TYPE (GpD)
(1)(1)
Max. power
rating (A)(±1A)
Operating voltage
(V)
Production with
new membranes
(2)
(liters per hour 
15%)
Noise at 1 m
distance
(dBA)
MINIMAR 200-400-600 PL
6
230 V/ 50 Hz
35-70-120
79.5
SAILOR 200 – S 1/21
9
230 V/50 Hz
35 - 60
79.5
SAILOR 400 – S 2/21
9
230 V/50 Hz
70 – 100
79.5
SAILOR 600 – S 3/21
12
230 V/50 Hz
100 - 160
79.5
SAILOR 1000 – S 2/40
13
230 V/50 Hz
160 - 250
79.5
SAILOR 1500 - S 3/40
13
6
230 V/50 Hz
400 V/50 Hz
220 – 350
220 - 350
79.5
SAILOR 2000
14
7
230 V/50 Hz
400V/50Hz
300
300
79.5
See test certificate for other details (i.e. different voltages, etc…)
9.2 A typical analysis of produced water
Component
Raw water
Desalinated water
Ammonia (mg/l)
no traces
no traces
Bicarbonate (mg/l)
63
4.9
Boron (mg/l)
4.0
0.4
Bromide (mg/l)
85
0.85
Calcium (mg/l)
315
0.8
Carbonate (mg/l)
no traces
no traces
Chloride (mg/l)
17600
183
Fluoride (mg/l)
0.8
< 0.1
Hydroxide (mg/l)
no traces
no traces
Iron (mg/l)
0.3
< 0.1
Magnesium (mg/l)
1300
2.6
Manganese (mg/l)
< 0.1
< 0.1
Nitrate (mg/l)
< 2.0
< 2.0
Potassium (mg/l)
418
6.4
Silicon as Si02 (mg/l)
10.7
< 5.0
Sodium (mg/l)
11000
105
Strontium (mg/l)
13.8
0.4
Sulfate (mg/l)
2436
2.3
Total sulfides (mg/l)
< 0.1
< 0.1
Turbidity (FTU2)
0.28
0.13
Conductivity (mhs/cm)
45000
550
Hardness as CaCO3 (mg/l)
6140
28
P-Alcalinity as CaCO3 (mg/l)
0
0
T-Alcalinity as CaCO3 (mg/l)
104
8
pH (units)
7.7
7.4
TDS at 180 oC (mg/l)
36073
250
(1)
Nominal production expressed in gallons per day.
(
1
)
Only for special series (No. of membranes/membranes type)
(2)
Test condition:
1. Operating pressure 60 BAR (850psi)
2. prefilter feed pressure 1.8 BAR (26psi)
3. feed water temperature 20C
4. feed water salinity 36000 ppm
5. feed water pH-value 3-11.