EV 10-50
5
Wireless hybrid arm sy em
Wireless hybrid arm sy em
A Tecnoalarm security system manages its protection zones through operating programs; the user can interact with his/her own
security system by enabling or disabling the operating programs. The management of the programs can be carried out through
different types of control devices:Consoles, proximity keys, wireless keys and evolution App.
1-2 - System functionality
The management of the security system is carried out by the user by enabling (arming) and disabling (disarming) the system's
operating programs.
The operating programs are defi ned by the installer on the basis of the security criteria requested by the user; if necessary,
the setup of the programs (protection zones associated with the program) can be modifi ed by the user with the Master code
The operating programs defi ne the set of protection zones enabled for alarm detection, when the program is armed.Programs
can be armed in single mode, one program at a time, or multiple programs armed simultaneously.
The EN 50131-1 standard has established 4 access levels.
Level 1 - Access by anyone (e.g. direct viewing on the console, or by simply pressing a button without having to enter codes).
Level 2 - Access by a user using a code. The programming can include customisable profi les.Each code can have an enabling
feature, the master code has all privileges by default.
Level 3 - Access by the maintenance technician or installer. These can only access if authorised by a user with level 2 access code
(Enabling from menu).
Level 4 - Access by the equipment manufacturer.
The minimum code length is 5 digits.
Options (e.g. inputs programmed as keys) that allow you to arm/disarm the system without an adequate level of access security
do not comply with EN 50131-3.
1-3 - Access levels
1 - SYSTEM FEATURES
1-1 - Control devices
Control and programming consoles
The system can be managed either with the EV LCD and EV 430 PROX Bus consoles or the two-way wireless consoles EV LCD BWL
and EV LCD-AL BWL; the consoles can coexist within the same system. The consoles include the EV KEY proximity key reader.
The EV 10-50 system can manage up to 8 Bus consoles and up to 4 wireless consoles.
Only the EV LCD and EV 430 PROX Bus consoles are equipped with a speaker with which the system, if necessary, emits voice
messages that inform the user about the operating statuses and system functioning issues.
The consoles allow the user to manage the programming of the System, and to operate on 8 programs.
The consoles and/or key readers can be freely associated with the operating programs. This operational fl exibility allows the user
to characterise, if necessary, the operation of the control device to the particular operating context.
Key points
The EV 10-50 System can be equipped with EV PROX BWL wireless key points and/or EV ATPROX row key points, each key point
can manage up to 3 programs.
High security RFID transponder key
The EV 10-50 System can manage up to 100 RFID keys, each of which can be associated with different functions. The operation
of the key in managing the programs is the same as that which can be exercised by entering a code, the two management modes
are complementary and either can be used to manage the system.
The EV KEY simplifi es the management of the System. The key is programmed with a unique code that cannot be duplicated.
Wireless keys
The EV 10-50 System can be equipped with remote controls, with which you can control the operation of programs and remote
controls of the system, each remote control can manage up to 3 control functions.
To Next Page
Loading...
