REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
38
10. MAINTENANCE
Disconnect the power supply before any maintenance operation, both of the refrigerated
cabinet and of the condensing unit.
Maintenance work must be carried out by a qualified technician.
10.1. ROUTINE MAINTENANCE
Ensure smooth operation over time of the equipment by performing periodic/preventive checks and maintenance.
10.1.1. INSPECTING AFTER DELIVERY
The following table lists a series of controls and activities that need to be carried out according to the recommended frequency.
OPERATION
FREQUENCY
WEEKLY MONTHLY AT 6-MONTHLY
INTERVALS
YEARLY
Check that the condensation water drain system works
correctly.
■
Check that there are no refrigerant gas leaks and that the
refrigerant system is working properly.
■
Check that the maintenance status of the electrical system is
in complete safety.
■
Check that the door seals and the door itself close properly.
■
Check the correct electronic control setting.
■
Check the condition of the sponge of the refrigeration unit
for mould.
■
Check that the refrigerating unit tray is not full.
■
To Next Page
Loading...
Need help?
General
