TECO A510s Series - Page 45

3-28
3.10.1 Power Terminals (For Standard H & C type)
Terminal
200V: 1 ~ 25HP
400V: 1 ~ 40HP
575V: 1 ~ 10HP
690V: 15 ~ 40HP
200V: 30 ~ 150HP
400V: 50 ~ 425HP
690V: 50 ~ 270HP
R/L1
Input Power Supply (For single phase use terminals R/L1 and S/L2)
S/L2
T/L3
B1／P
B1／P－B2: external braking
resistor
-
B2

 -: Connect braking module

-
U/T1
Inverter output
V/T2
W/T3
E/PE/ Ground terminal
Note: The power terminal of 575V & 690V Enhanced E & G type and Standard H & C type are
the same. Please refer to this quarter for 575V & 690V Enhanced E & G type power terminal
information.
200V: 1 ~ 2HP, 400V: 1 ~ 3HP
200V: 3 ~ 7.5HP, 400V: 5 ~ 7.5HP, 575V: 1~3HP
200V: 10HP, 400V: 10 ~ 15HP
R
/L1
S
/L2
T
/L3
E B1/P B2
Power In
Dynamic Brake
CHARGE
U
/T1
V
/T2
W
/T3
E
To Motor
T
Terminal screw size
T
M4 M4
Terminal screw size
T
M4 M4
Terminal screw size
T
M6 M6