TECO JSMA-PMC15AB - User Manual

1
■Warning and Alert:
Warning
 Do not proceed to the assembly of the line while electrifying.
 Circuit & change components between entering shutting down the power supply and stopping
showing CHARGE LED light of the Servo driver.
 The output of Servo drive [U, V, W] must NOT touch the AC power.
Alert
 Install the fan if the temperature around is too high while the Servo driver is installed in the
Control Board.
 Do not proceed to the Anti-Pressure-Test to the Servo driver.
 Confirm the quick stop function is available before operate servo drive.
 Matching up machine to change the user parameter setting before machine performs. If there is
no according correct setting number, it could lead to out of control or breakdown.
Safety proceeding:
Check the covering letter detail before installing, running, maintaining and examining. Furthermore, only
the profession-qualified people can proceed to the line-assembly.
Safety proceeding in the covering letter discriminate between “Warning”&”Alert”.
Indicating the possibility dangerous situation. It could cause the death or serious
damage if being ignored.
Indicating the possibility dangerous situation. It could cause smaller or lighter human
injured and damage of equipment.
Read this covering letter detail before using Servo driver.
Alarm
Warning
!
!

TECO JSMA-PMC15AB Specifications

General

Brand	TECO
Model	JSMA-PMC15AB
Category	Servo Drives
Language	English

Summary

Safety Warnings and Alerts

Electrical Safety Warnings

Warnings on electrical hazards during assembly and operation.

Operational Alerts and Precautions

Alerts for temperature, anti-pressure tests, and parameter matching.

Safety Procedures and Hazard Symbols

General Safety Procedures

Guidelines on checking documentation and qualified personnel for installation.

Hazard Indicator Meanings

Explanation of alarm and warning symbols indicating potential dangers.

Chapter 1: Checking and Installing

Product Inspection and Verification

Steps to check servo drives/motors for damage and operational readiness.

Model Code Identification

Guide to understanding TECO servo drive and motor model codes.

Installation Environmental Conditions

Recommended ambient conditions: temperature, humidity, and vibration limits.

Chapter 2: Wiring and Connections

Main Circuit and Peripheral Wiring

Diagram and explanation for wiring main circuits and peripheral devices.

Servo Drive Wiring Specifications

Details on terminal connections, wire specs, and connector types for servo drives.

Motor and Encoder Terminal Layouts

Diagrams for motor terminal and encoder wiring connection assignments.

Wiring Examples for Control Modes

Illustrative wiring diagrams for Position Control Modes (Pe Mode).