10
1-3 Conditions for Installation of Drives
1-3-1 Environmental Conditions
The product should be kept in the shipping carton before installation. In order to retain the warranty coverage, the
AC drive should be stored properly when it is not to be used for an extended period of time. Some storage suggestions
are:
Ambient Temperature: 0 ~ + 55 ℃; Ambient Humidity: Under 90% RH (Under the condition of no frost).
Stored Temperature: - 20 ~ + 85 ℃; Stored Humidity: Under 90%RH (Under the condition of no frost).
Vibrating: Under 0.5 G.
Do not mount the servo drive or motor in a location where temperatures and humidity will exceed specification.
To avoid the insolation.
To avoid the erosion of grease and salt.
To avoid the corrosive gases and liquids.
To avoid the invading of airborne dust or metallic particles.
When over 1 Drives are installed in control panel, enough space have to be kept to get enough air to prevent the
heat; the fan also must be installed, to keep the ambient temperature under 55 ℃.
Please Install the drive in a vertical position, face to the front, in order to prevent the heat.
To avoid the metal parts or other unnecessary things falling into the drive when installing.
The drive must be stable by M5 screws.
When there were the vibrating items nearby, please using vibration-absorber or installing anti-vibration- rubber, if
the vibration can not be avoided.
When there is any big-size magnetic switch, welding machines or other source of interference. Please install the
filter. When the filter is installed, we must install the insulation transformer..
To Next Page
Loading...
Need help?
General
