Page 5 of 7 12/06/13
Basic Quick Start Parameter List
Parameter Default Range Note
00-14 10.0
0.1~3600.0
Acceleration time in Secs
00-15 10.0
0.1~3600.0
Deceleration time in Secs
00-04 000 0-2
0: Forward/Stop-Reverse/Stop
1: Run/Stop-Reverse/Forward
2: 3-Wire Control Mode-Run/Stop
00-12 50/60Hz
0.01~650.00
Max frequency limit.
00-13 0.0
0.00~649.00
Min frequency limit
00-02 00-00 0-2 Start mode:-
Keypad = 00-00
Remote = 00=01
Communication = 00-02
00=05 00-00 0-6
00-00 = keypad
00-01= Potentiometer on keypad
00-02= External AVI analogue signal
00-03= External ACI analogue signal
00-04 =External up/down frequency control
00-05= control by Communication method
00-06=PID output
07-09 000 0-1 Stop method:- 00-00 = Decel to stop
00-01= Coast to stop
02-01 **A **A Motor overload protection
13-08 000 Set to factory setting.
1150 = 50 HZ system.
1160 = 60HZ system
Note:- For Full Parameter List see the Instruction manual
To Next Page
Loading...
