TECO L510S Series - 3.2 Installation

10
2.3.2 Description of control circuit terminals
Frame1&Frame2
Terminal
symbols
TM2 Function Description
Signal Level
RA
Relay output terminal, Specification:
250VAC/1A(30VDC/1A)
250VAC/1A(30VDC/1A)
RB
COM
S1~S5 (COMMON) 【NPN】
±15%,Max output current
30mA
24V
S1~S5 (COMMON) 【PNP】
S1
Multi-function input terminals(refer to group3)
24 VDC, 4.5 mA, Optical
coupling isolation
(Max,voltage30 Vdc,
Input impedance 6kΩ)
S2
S3
S4
S5
10V
Built in Power for an external speed
potentiometer
10V,(Max current:20mA)
AVI
Analog voltage input, Specification : 0/2~10VDC
(choose by parameter 04-00)
0~10V(Input impedance
200kΩ)
ACI
Analog current input, Specification : 0/4~20mA
(choose by parameter 04-00)
0~20mA(Input impedance
249Ω)
AO
Multi function analog output terminal.
Maximum output 10VDC/1mA
0~10V(Max current 2mA)
AGND Analog ground terminal
NPN:
PNP: