Need help?Do you have a question about the TECO T-Verter E2-401-H3F and is the answer not in the manual?
General| Enclosure Rating | IP20 |
|---|---|
| Input Voltage | 380-480V AC |
| Output Voltage | 0-480V AC |
| Frequency Range | 0-400 Hz |
| Control Method | V/F control, Sensorless Vector Control |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Ground Fault |
| Communication Interface | RS-485 (Modbus RTU) |
| Operating Temperature | -10°C ~ +50°C (14°F ~ 122°F) |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5 ~ 95% RH, non-condensing |
| Cooling Method | Fan Cooled |
Introduces the E2 series of adjustable speed drivers and their basic power ratings.
Explains critical safety warnings, including 'Danger' and 'Caution' symbols and their meanings.
Details safety guidelines for pre-power up, power application, and during inverter operation.
Covers environmental conditions and general installation guidelines for the inverter.
Explains how to identify inverter models and provides physical dimensions for various series.
Details the functions of primary and control circuitry terminal blocks and shows wiring diagrams.
Provides guidelines for electromagnetic compatibility mounting and proper cable connections.
Guide to using the inverter's keypad interface and accessing operational parameters.
Detailed explanations of various inverter parameters (F_00 to F_30) and their functions.
Configuration for speed control, frequency limits, V/F patterns, and start/stop modes.
Configuration for stopping methods, DC braking, and electronic thermal overload protection.
Lists common malfunction indications, possible causes, and countermeasures.
Step-by-step diagnostic procedures presented as flowcharts for various inverter issues.
Guidelines for periodic inspection, examination, and maintenance of the inverter.
Procedures for measuring voltage/current and specifications for optional components like filters.
To Next Page
