Need help?Do you have a question about the TECO T-Verter E2 Series and is the answer not in the manual?
General| Output Frequency | 0-400 Hz |
|---|---|
| Control Method | V/F control, Sensorless Vector Control |
| Enclosure | IP20 |
| Overload Capacity | 150% for 60 seconds |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit |
| Communication Interface | RS485, Modbus RTU |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5-95% (non-condensing) |
| Altitude | Up to 1000m |
| Ambient Temperature | -10°C to +40°C |
Critical safety instructions and warnings before powering on the inverter.
Safety guidelines for when power is applied and during operation, including specific supply use.
Safety measures during operation and precautions for the installation environment.
Guidelines for selecting an appropriate installation site and environmental conditions.
Explains how to identify the inverter model number based on its code.
Detailed technical specifications including power, voltage, current, and dimensions.
Details the functional aspects like frequency control, protection, and operation.
Guidelines for external wiring, EMI connections, and grounding.
Illustrates the wiring diagram and provides specifications for wire terminations.
Description of terminals and connections for the primary power circuitry.
Description of terminals and connections for the control circuitry.
Illustrates the internal circuit diagram for specific inverter models.
Steps for connecting power supply and motor cables to the inverter.
Guidelines for mounting the inverter to meet EMC regulations.
Steps for connecting power supply and motor cables to the inverter.
Guidelines for mounting the inverter to meet EMC regulations.
Illustrates the internal circuit diagram for specific inverter models.
Explains the keypad layout and how to operate the inverter using the control panel.
Provides a step-by-step visual guide for keypad operations.
Describes the F_00 parameter, which is for factory adjustment only.
Explains acceleration and deceleration time parameters and their calculation.
Details parameters for selecting operation mode and motor rotation direction.
Describes the different V/F patterns available for motor control.
Explains parameters for frequency limits, SP1, JOG, and start/stop control methods.
Details parameters for speed control, carrier frequency, and torque compensation.
Explains DC braking parameters and stopping methods like controlled deceleration and free run.
Details parameters for motor and inverter thermal overload protection.
Describes functions for multifunctional inputs, including JOG, multi-speed, and emergency stops.
Details parameters for multifunctional output terminals and reverse lock-out.
Explains parameters for auto-restart after power loss and the number of auto-restart times.
Covers factory reset, multi-speed settings, and direct start configuration.
Details parameters for CPU program version and logging of the last three faults.
Lists malfunctions that require manual reset and their causes/countermeasures.
Lists malfunctions where auto-reset is inoperative, with causes and countermeasures.
Lists operative malfunctions with causes and countermeasures, covering various error codes.
To Next Page
