21
Keypad Operations:
Keypad Illustration
Freq. ref. controlled by TM2 or VR
Forward run
(Fn_11=1/2/3)
RUN/STOP signal is on
Ο Ο Ο Ο
Reverse run
(Fn_10 =1)
SEQ FRQ FWD REV
DISPLAY Hz OR
Ο Ο
Display voltage value
RPM
Hz/RPM VOLT
Light on: program mode
Ο Ο
Display current value
FUN AMP
RUN/STOP
Mode selection key
COMMAND KEY
Scroll Arrow keys
Forward /Reverse
Command key
Digit selection key
Speed Pot
Adjustment FREQ. SET Read/Write key
Keypad Function:
RUN
STOP
DSP
FUN
FWD
REV
<
RESET
READ
ENTER
READ
ENTER
<
RESET
FWD
REV
RUN
STOP
DSP
FUN
z Run / Stop Button Used for Start / Stop commands from the Keypad
z DSP / FUN Button Used for Displaying Functions and Meters
z FWD / REV Button Used for Foreword / Reverse commands from the Keypad
z < / Reset Button Used for moving Diagonally and Resetting the Drive
z READ / ENTER Used for Reading and Entering Functions
z Arrows are used for moving through and Changing Parameters
To Next Page
Loading...
