TECOM ChallengerPlus - Product Overview; Product Contents

ChallengerPlus Installation and Quick Programming Manual 1
Product overview
Challenger is a scalable intrusion detection and access control system.
Challenger panels use one, and optionally a second, RS-485 data bus (LAN) to
provide continuous polling of remote arming stations (RAS) and data gathering
panels (DGP). These devices extend the system’s intrusion detection and access
control functions.
Refer to the ChallengerPlus Programming Manual for details.
Product contents
Table 1 below lists the items that are shipped with Challenger control panels.
Table 1: Challenger panel shipping list
Quantity
Item
1
Metal enclosure (with four spring standoffs fitted)
1
Challenger panel board
1
604 to RJ12 lead line, 1.5 m
1
ChallengerPlus Administrators Manual
1
ChallengerPlus Users Manual
1
ChallengerPlus Installation and Quick Programming Manual
1
16 Volt AC plug pack
1
Tamper switch
1
Tamper switch metal bracket
1
Ring terminal
5
M3 x 14 pan head screws
15
3-way plug-on screw terminal connectors
10
2-way plug-on screw terminal connectors
1
Red battery lead with QC terminal
1
Black battery lead with QC terminal
1
1K 1/4 watt resistor
40
10K 1/4 watt resistors
Inspect the package and contents for visible damage. If any components are
damaged or missing, do not use the unit; contact the supplier immediately.