TECOM TS1066 User Manual

TS1066 Network Access
Controller Programming
Manual
P/N MAPROG-TS1066 • REV 1.6 • ISS 16AUG19

TECOM TS1066 Specifications

General

Brand	TECOM
Model	TS1066
Category	IP Access Controllers
Language	English

Summary

Important Information

Operating Modes

IP Direct Mode

IP Extended Mode

Classic Mode

Input and Relay Mapping

Overriding Door State

Door Schedules

Door Overrides

Recommended Programming Sequence

CTPlus Connection Methods

Uploading Default Configuration

Uploading in IP Direct or IP Extended Mode

Uploading in Classic Mode

Upgrading Firmware

Upgrading Firmware in All Modes

Steps for upgrading NAC firmware via CTPlus or Firmware Loader.

Using the Firmware Loader

Alternative method for upgrading firmware using direct USB connection.

Programming IP Communications

Configuring Ethernet

Configuring Communications Path

Programming the NAC

Setup Tab and General Options

Assigning RASs and DGPs

Programming Doors

Hardware Options and Reader Assignment

Access Options

Sets parameters for access time, dual custody, card-to-PIN.

Shunt, Egress, Passback Options

Configures shunting, egress, and anti-passback settings.

Programming Alarm Control Options

IN and OUT Alarm Control

Programming Input and Relay Mapping

Input Mapping Procedures

Explains how to map NAC inputs for ChallengerPlus integration.

Relay Mapping Procedures

Explains how to map NAC relays for ChallengerPlus integration.

Programming Macro Logic

Macro Options

Covers macro logic program functions and timing.

Programming User Information

Programming Door Groups

Details programming door groups for NAC access.

Programming Users

Details programming user access credentials and cards.

Management via CTPlus

Status and Control

Monitoring NAC status and controlling devices via CTPlus.

Commands

Executing remote commands on NAC and its devices.

Configuring Door Schedules

Configuring Door Overrides

Nac Door Defaults