EasyManua.ls Logo

TECOM TS1066 - Setup Tab and General Options

TECOM TS1066
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Regions section on page 55.
Setup tab
Each field of the Setup tab is explained in the following sections.
Poll DGP
If the NAC is connected to a ChallengerPlus panel, and the current DGP record
is for the NAC as a ChallengerPlus DGP, then the Poll DGP check box can be
used to poll the DGP from the ChallengerPlus panel.
DGP model
This field and shows the DGP model. For a NAC, the field will always show
TS1066 - Network Access Controller.
NAC mode
This field shows the operating mode of the NAC. The field can be one of the
following:
IP Extended 4-doors: In this mode, management software has a direct IP
connection to the NAC. In addition to access control, the NAC provides
alarm control and reporting functionality in conjunction with a
ChallengerPlus panel. It allows to control up to 4 doors.
IP Extended 8-doors: In this mode, management software has a direct IP
connection to the NAC. In addition to access control, the NAC provides
alarm control and reporting functionality in conjunction with a
ChallengerPlus panel. It allows to control up to 8 doors.
Classic 4-door: In this mode, in addition to access control, the NAC
provides alarm control functionality in conjunction with a ChallengerPlus
panel and it allows up to 4 doors.
Classic 8-doors: In this mode, in addition to access control, the NAC
provides alarm control functionality in conjunction with a ChallengerPlus
panel and it allows up to 8 doors.

Other manuals for TECOM TS1066

Related product manuals