TECOM TS1067E - User Manual

TS1067E Network Access
Controller Installation
Manual
STOP!
Before you begin
Please use CTPlus to download and update your
NAC firmware. CTPlus is available at
https://www.firesecurityproducts.com.au/downloads-and-resources-library
P/N MAINST-TS1067E • REV 1.0 • ISS 23JUN23

Summary

Specifications

Mechanical

Key physical dimensions and weight information for the device.

Electrical

Details on power input, battery requirements, and fuse specifications.

Environmental

Operating temperature and humidity specifications for the device.

Enclosure details

Information regarding compatible enclosures for the device.

Installing the Network Access Controller

Installation guidelines

Adherence to country-dependent requirements and applicable standards.

Installation procedure

Step-by-step process for mounting the Network Access Controller.

RS-485 Networks

ChallengerPlus LAN

Connecting the Network Access Controller to a ChallengerPlus system LAN.

RS-485 buses

Details on local LANs for connecting devices like keypads and readers.

RS-485 cabling

Recommendations for wiring RS-485 networks to ensure reliability.

Appendix D: Cabling Requirements

System Earthing

Essential grounding requirements for reliable system operation.

Ethernet Cabling

Guidelines for compliant Ethernet cable routing to minimize emissions.

Power Supply to RS-485 Devices

How to power RS-485 devices using the NAC or an external supply.

TECOM TS1067E Specifications

General

Communication Interface	RS-485, Wiegand
Protocols	TCP/IP, ARP, HTTP, DHCP, UDP, SMTP, NTP, DNS
Ethernet ports	1 x 10/100 Mbps
Power Supply	12V DC, 1A
Operating Temperature	-10°C to 50°C
Humidity	90% (non-condensing)