TECshow NAVIGATOR SMART RDM User Manual

NAVIGATOR SMART RDM
P.
9
ENGLISH VERSION
14. Black-out mode
• Setup black-out mode.
• Rotate the PAN wheel to locate “09.Black-out
mode”
• Press ENTER to confirm.
• Rotate the PAN wheel to select “only dimmer” or
“all channels”.
• Press ENTER to save setup or press ESC to return
to the main menu.
- Only dimmer: press “Black-out” button
only dimmer channels black-out(DMX
output 0 value.)
- All channels: press “Black-out” button
all channels black-out(DMX out 0 vlaue)
15. Fog machine control”
The menus setup fog machine DMX channel/DMX output
value/on-o time
1. Rotate the PAN wheel to locate “10 fog control.
2. Press ENTER to confirm.
3. Press SWAP to switch between the four
settings: Auto FOG/ON TIME OFF TIMER/
FOG CH 1/FOG CH2.
- In “Auto FOG” ON/OFF fog time control.
- In “ON TIME/OFF TIMER” setup fog ma-
chine ON/OFF time.
- In “FOG CH1/ VALUE” setup fog machine
channel 1 DMX address and DMX value.
- In “FOG CH2/ VALUE” setup fog machine
channel 2 DMX address and DMX value.
- If “Auto FOG” setup “ON”, will according
setup time ON/OFF fog machine.

TECshow NAVIGATOR SMART RDM Specifications

General

Brand	TECshow
Model	NAVIGATOR SMART RDM
Category	Controller
Language	English