Need help?Do you have a question about the TECshow NAVIGATOR 2 and is the answer not in the manual?
General| Brand | TECshow |
|---|---|
| Model | NAVIGATOR 2 |
| Category | Controller |
| Language | English |
Details the DMX controller's capabilities, including channel control, scene storage, and special features.
Covers interface details, key features, connectivity options, and physical dimensions/weight.
Provides essential safety guidelines, warnings, and important precautions for initial setup and operation.
Details how to unpack the product and lists all components included in the package.
Enumerates the comprehensive features of the Navigator 2 DMX controller, including channel control and scene management.
Illustrates the Navigator 2 with numbered components, aiding in physical identification.
Detailed explanation of each button, fader, LED indicator, and connection port on the Navigator 2 controller.
Guidelines for installing the unit in a rack, ensuring ventilation, and safety during cleaning/servicing.
Instructions for factory resetting the controller and proper DMX cabling for connecting multiple units.
Explains DMX address ranges, fixture button assignments, and how to control devices via addresses.
Details how faders and pages control DMX addresses and how to customize fader assignments and reversal.
Guides on re-assigning faders and reversing channel output to customize fixture control attributes.
Explains how to configure fade time behavior for channels or specific attributes like Pan/Tilt.
Steps to activate the programming mode on the Navigator 2 controller.
Detailed procedures for recording new scenes, modifying existing ones, and duplicating scenes.
Instructions for removing scenes and banks, and copying bank data for program management.
Guides on creating chases, copying banks into chases, and adding steps to existing chases.
Procedures for removing individual steps from chases, deleting entire chases, and a caution for mass deletion.
Instructions for running scenes manually, automatically, or synchronized to music.
Explanation of the Blackout button's function to turn off all lighting output.
Guides on how to manually step through, auto-run, or play chases in time with music.
Instructions for playing back multiple chases sequentially and configuring the controller for MIDI operation.
Details the MIDI note assignments for triggering scenes, chases, and blackout functions.
Steps for connecting fog machines to the controller and initiating fog generation.
Instructions for connecting strobe units and activating the strobe effect.
To Next Page
