English version
7. PLAYBACK (SCENES)
8. PLAYBACK (CHASES)
Running in Auto-Mode
1) Press and hold the AUTO DEL button until the
AUTO TRIGGER LED turns on.
2) Change BANK programs by using BANK UP/
DOWN buttons if necessary.
3) You can adjust the time between steps by moving
the SPEED fader and the duration of the step by
moving the FADE TIME fader.
4) You can change Banks while in operation by us-
ing the BANK UP/DOWN buttons.
BlackOut
The Blackout button brings all lighting output to 0
or o (also called the home position of the unit).
Auto Run Chases
1) Press any one of the CHASE buttons.
2) Press and release the Auto/Del button. The cor-
responding LED will blink.
3) Adjust the SPEED and FADE faders to your liking.
4) You can override the speed and fade time by tap-
ping the TAPSYNC/DISPLAY button (three) times.
The chase will now run on the interval time of the
taps.
Music Run Chases
1) Press any one of the CHASE buttons.
2) Press and release the MUSIC/BANK COPY but-
tons. The corresponding LED will blink in the display.
Manual Run Scene
When power is rst turned ON, the controller will
be in manual scene mode.
1) Make sure neither MUSIC TRIGGER nor AUTO
TRIGGER LED's on the LED display are on.
2) Select the program BANK that stores the scene
you want to run manually by using the BANK UP/
DOWN.
3) Press the SCENE button to run.
Running in Sound-Mode
1) Press the MUSIC/BANK-COPY button until the
MUSIC TRIGGER LED turns on.
2) Change BANK programs by using BANK UP/
DOWN buttons if necessary.
3) Press the MUSIC/BANK-COPY to exit.
Manual Run Chases
This function allows the user to manually step
through each individual step in a chase.
1) Press and hold PROGRAM button for 3 seconds
to enter programming mode.
2) Start a chase by pressing any one of the CHASE
buttons.
3) Press the TAPSYNC/DISPLAY button to manual-
ly step through the chase.
4) Use the BANK buttons to scroll through the
chases.
5) Press and hold the PROGRAM button for 3 sec-
onds to exit programming mode.
To Next Page
Loading...
Need help?
General
