TECSYSTEM NT935 ETH - Ethernet Module Parameter Programming - Part 2; Enabling Telnet Client in Windows; Telnet Screen Connection Steps

27
NT935 ETH
7) Enable Telnet Client and click "OK"
The screen below will open.
Wait for the Telnet function to activate.
8) Close the open screens and restart the PC if
required
9) START menu (Windows)
10) Search for the Telnet program
15) Enter: 192.168.10.120 9999
16) Press ENTER
12) TELNET SCREEN
11) Press ENTER to launch the program
13) Enter: OPEN
14) Press ENTER
17) Enter the Password: TECS
18) Press ENTER
Note: In this screen we have the MAC
address and the software version of the
ETH port available.