The following screen will be displayed:
TECHNICAL SPECIFICATIONS OF THE EXTENSION CABLE FOR Pt100
1. Cable 20 x AWG 20/19 Cu/Sn
2. Section 0.55 mm²
3. Flame retardant insulation PVC105
4. CEI 20.35 IEC 332.1 regulations
5. Maximum operating temperature: 90°C
6. Conformation: 4 sets of three twisted and coloured conductors
7. Shield in Cu/Sn
8. Flame retardant PVC sheath
9. External diameter 12mm
10. Standard conformation in 100m coils
To check the programmed parameters or repeat programming, follow the TELNET SCREEN
from step 12 to step 19, page 27.
4) Enter the new Telnet Password (4 digits max), press ENTER; if you wish to keep the set
Password, press ENTER.
Enter: S to save the modified data.
Q to exit Telnet without saving the data.
Indications of LEDs 1-2 of the Ethernet port:
LED 1: Link
Off = No link
Amber = 10 Mbps
Green = 100 Mbps
LED 2: Activity
Off = No Activity
Amber = Half Duplex
Green = Full Duplex
To Next Page
Loading...
