TECSYSTEM NT935 ETH - UL Specification and Ratings; Input Supply and Protection

33
NT935 ETH
FCD FUNCTION
UL SPECIFICATION AND RATINGS
CABLE SPECIFICATION
Dimension for main circuit 18AWG, working temperature over 105°C
MASS OF THE EQUIPMENT
0,45 Kg
INPUT SUPPLY
100 – 240 Vac / Vdc (±10%), 50/60 Hz, 7,5VA max
PROTECTION
External switch or circuit breaker
OUTPUTS RELAYS
5 relay output: 10A 250Vac-res COS=1
PORT
Ethernet
Suitable for use on a flat surface of a type 1 enclosure if Back panel is provided with two short fixing screws tightening
torque : 0.57Nm