TECSYSTEM T154 Series User Manual

14
T154 SERIES
T154 –4 / T154 –4 FAHRENHEIT
STEP
PRESS
EFFECT
PRESS
NOTES
1
Keep the PRG button pressed till the PRG-ON LED
lights up. After PRG the ALARM threshold for CH 1-2-3
is displayed
2
Set the desired threshold
Default 90°C (194°F)
3
The TRIP threshold for CH 1 is displayed
4
Set the desired threshold
Default 119°C (246 °F)
5
Repeat steps 2-3 and 4 to set the ALARM and TRIP
thresholds of channels CH2 and CH3
6
The CH 4 LED flashes
CH 4 enabling
7
Set YES or NO
with YES CH 4 is ON,
with NO CH 4 is OFF
8
The ALARM threshold for CH 4 is displayed
If CH 4=NO go to step
11, Default NO
9
Set the desired threshold
Default 120°C (248 °F)
10
The TRIP threshold for CH 4 is displayed
11
Set the desired threshold
Default 140°C (284 °F)
12
The Fan LED flashes and the channel LEDs ventilation
refers to light up
Default Ch1-Ch2-Ch3
13
Select NO, CH 1-2-3 or CH 4 (if CH 4
YES)
NO: fan disabled,
go to step 22
14
ON is displayed
FAN switching on
15
The ON threshold of the FANS is displayed
16
Set the desired threshold
Default 70°C(158°F)
17
OFF is displayed
FAN switching off
18
The OFF threshold of the FANS is displayed
19
Set the desired threshold
Default 60°C(140 °F)

TECSYSTEM T154 Series Specifications

General

Brand	TECSYSTEM
Model	T154 Series
Category	Computer Hardware
Language	English