c. Type "C" Air Cleaner
1. Tum coverto left (counterclockwise)and remove itand
paper filterfrom flange. See Figure 18.
2. Discard filter.
3. Clean cover and flangethoroughly.
4. Installnew paper filter intocover.
5. Positioncover and filter againstflange with tab on cover
inserted into lower left comer of slot inflange.
6. Push coverfirmly against flange and turn to right(clock
wise) as far as it will go,
7. Be sure retainers are locked aroundflange.
2
1
1. Retainer
2. Slot
3. Flange
4. Paper Filter
5. Tab
6. Cover
3 4 5
Figure 18. Air Cleaner Type "C" Assembly
d. Type "D" Air Cleaner
1. Remove cover bypullingtab =A" away from bodywhile
liftingcover upward.See Figure 19.
2. Inspectfilter(s)for discolorationor dirtaccumulation. If
either is present, see "Servicing Filters"instructions.
3. Clean insideof cover and bodythoroughly.
4. Installfoam filter(s) and new paperfilter if present.
5. installcover byhookingslotof cover over tab "B" on
body.
6. Push cover down, snappingcover onto body securely.
3
2
1. Tab "B"
2. Foam Filter
3. Slot
4. Cover
5. Tab "A"
6. Paper Filter
7. Body
Figure 19. Air Cleaner Type "D" Assembly
7
Page 12 181-1215-14
To Next Page
Loading...
