29
The breather compartment is located under the flywheel.
A check valve allows excess crankcase pressure to be
vented through the element and out the breather tube.
The breather tube is connected to the air cleaner body.
When reassembling the breather, DO NOT pinch the
filter element under the breather cover or leak may
occur.
Condensed oil vapors are returned to the crankcase by
means of the oil return hole. The oil return hole is opened
and closed in the cylinder by the piston.
The breather filter element can be cleaned using solvent.
When reinstalling the check valve, apply oil to aid in
assembly. A new breather valve body can be pressed
into the block to replace a damaged breather valve body.
NOTE: ALWAYS RECONNECT THE BREATHER TUBE
BREATHER TUBE
CONNECTION
OIL RETURN HOLE
Not For Resale
www.SmallEngineDiscount.com
To Next Page
Loading...
