41
TORQUE SPECIFICATIONS
Inch-Lbs. Nm
Governor Rod Clamp to Lever 7-12 1.4 - 1.4
Breather Cover 40-50 4.5 - 5.7
Valve Box Cover 25-35 3.1 - 4.0
Connecting Rod 95-110 10.7 - 12.4
Cylinder Head 180-220 20.3 - 25
Mounting Flange or Cylinder Cover 100-130 11.3 - 14.7
Housing Baffle to Cylinder 80-120 9.0 - 13.6
Solid State Ignition to Cylinder 30-50 3.4 - 5.7
Alternating Coil Assembly to Lamination 25-35 2.8 - 4.0
Flywheel Nut 400-440 45.2 - 49.7
Housing to Baffle 35-45 4.0 - 5.1
Carburetor Stud to Cylinder 50-75 5.7 - 8.5
A/C Hex Nut to Stud 35-45 4.0 - 5.1
Control Face Plate to Baffle 30-40 3.4 - 4.5
Starter Top Mounting 20-30 2.3 - 3.4
Electric Starter to Baffle 25-35 2.8 - 3.9
5/8-18 Plug (Hex Flange) Drain plug 90-150 10.2 - 17.0
Plastic Tank to Housing 12-20 1.4 - 2.3
Threaded Fill Tube (Plastic) 45-65 4.0 - 7.3
Large Diameter Oil Fill Plug Hand Tight
Muffler Mounting (Shoulder Screw) 100-165 11.3 - 18.7
A/C Body & Housing to Baffle 35-45 4.0 - 5.1
Conduit Clip Screw (Throttle Cable) 5-15 .6 - 1.7
Muffler Deflector 10-15 1.1 - 1.7
Not For Resale
www.SmallEngineDiscount.com
To Next Page
Loading...
