Attach Angle Tether
• The tether will come pre-assembled to the A-Frame.
• Unfold the adjustable tether and clip it to the U-Bar on the
underside of the Table Bed (Figure 24).
• Slide the buckle to lengthen or shorten the strap depending on your
desired maximum angle of inversion.
EZ-Angle Tether Accessory
Some models may come with the EZ-Angle Tether, embroidered
with color-coded angle markers at 20° (GREEN), 40° (ORANGE),
or 60° (RED). Simply slide the buckle so its center aligns with your
desired color setting.
Attach Head Pillow (optional)
• Some models come with the Head Pillow. Secure it with the Velcro
Straps through the holes in the Table Bed (Figure 25). You
may customize the position depending on your preference.
LENGTHEN
SHORTEN
FIGURE 24
FIGURE 25
STEP
6
Attach Angle Tether & Head Pillow
For All Models
11
To Next Page
Loading...
