Teeter FitSpine LX7 - Safety Warning Labels & Product Specifications

Safety Warning Labels & Product Specications
Important: Please review all labels and supporting materials before using your inversion table.
This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed,
contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
Assembled Non-Use Dimensions: 60.8 (L) x 27.5 (W) x 57.0 in (H) (154.4 x 69.9 x 144.8 cm)
Maximum In-Use Dimensions: 81.5 (L) x 27.5 (W) x 87.0 in (H) (207.0 x 69.6 x 221.0 cm)
Storage Dimensions: 27.5 (L) x 27.5 (W) x 68 in (H) (69.9 x 69.9 x 172.7 cm)
Weight
(approx.): LX4: 68.7 lb (31.2 kg)
LX5-LX9: 70.8 lb (32.1 kg)
27.5 in (69.9 cm)
57.0 in (144.8 cm)
60.8 in (154.4 cm)
The LX4 is shown here.
Your actual model may vary.
4