C. Using the Manual Program
1 2
1. Once the cooking program is
selected, the corresponding
indicator light is solidly lit.
2. A default temperature flashes.
3. Press the + and – buttons to
modify the temperature, if
required.
4. Press the OK button to confirm.
5. A predefined cooking time
flashes.
6. Press the + and – buttons to
modify the time, if required.
7. Press the Start button to confirm
and start cooking, and the time
display will stop flashing.
8. Cooking has started. The graphic
on the screen's left indicates that
a cooking cycle is underway and
that the appliance is heating.
The time counts down by the
minute, and then by the second
during the last minute.
Note: Each subsequent time the
appliance is used, the time and
temperature displayed default to the
previous time and temperature used.
3 4
5 6
7 8
34
To Next Page
Loading...
