TEFAL Cake Factory - Product Presentation; Preparation; Installation and Connection

Product Presentation
1 2 3 6
7 8
4 5
1 On/Off button
2 Back button
3 Minus button (-)
4 Plus button (+)
5 OK / Start button
6 Control panel
7 Automatic programs
8 Manual program
Preparation
1. Remove all packaging, stickers and various accessories from both the inside and outside of
the appliance.
2. Prior to first use, thoroughly clean the 3 different moulds using some hot water and some
washing-up liquid, carefully rinse and dry.
Installation and Connection
Appliance start-up applies to all programs
1
2
1. Plug in your appliance.
3. Next, wait a few seconds before
pressing the On/Off button. The
first program flashes, indicating
the “Program Selection” mode.
3
30