7
15
Using your pressure
cooker for the first time
■ Fill the pressure cooker up to 2/3 full with water.
■ Close the lid on the pressure cooker.
■ Turn the selector so that it is on .
■ Put the pressure cooker on the heat source at the highest
temperature.
Turn the pressure cooker so that the unlocking button is
facing you.
■ For Clipso Control pressure cooker, set the timer for 15 minutes
(see chapter on Smart Timer). The pressure indicator moves up after a
few minutes. For Clipso Control and Clipso Vitamin (model with air
release system), air and steam release can be heard for a short period
of time (see chapter on Air Release System).
■ When steam starts to release from the outlet, lower the heat source
and time for 15 minutes.
For all models
■ After 15 minutes, turn off the heat.
■ Gradually position the programme selector to .
■ When no more steam escapes from the steam outlet and the
pressure indicator is down, open the pressure cooker.
■ For Clipso Control, make sure you now remove the timer from its
holder.
■ Rinse out the pressure cooker under water and dry it.
■ Clean the basket with warm water and washing up liquid.
■■ Note: the appearance of marks/stains on the interior base of the
pressure cooker does not alter the quality of the metal. It is merely
due to calcium deposits. To remove these, use a scouring pad and
some diluted vinegar.
4132081 CLIPSO CONTROL UK 18/09/02 10:36 Page 15
To Next Page
Loading...
