1
5
■ You are able to increase or reduce the cooking
time on the timer at any time, even during
countdown, by simply pressing the + (to increase)
or – (to reduce) button.
■ When the cooking time is over, the timer informs
you with continuous beeps. Press either + or –
button only once to stop the beeping. The timer
turns itself off automatically.
Note: your Clipso pressure cooker is
designed to operate with or without the timer.
■ To remove the timer: lift the timer carefully away
from the module, making sure to hold it on both
sides.
What to do if the following happens:
■ If the timer beeps regularly and if the screen
shows --:--, then you should put the timer back onto
the module. The OK sign should then appear on the
screen.
■ You have programmed the timer but then decide
you don’t wish to use it: the timer will turn itself
off automatically after an hour, but you can switch
it off yourself manually by pressing both
the + and – buttons at the same time.
Use and care:
■ Do not put the timer in the dishwasher.
■ Do not put the timer in water.
■ Instead, use a clean cloth to clean the timer.
■ Do not use any cleaning liquids to clean the
timer.
Clipso Control Smart timer
4132081 CLIPSO CONTROL UK 18/09/02 10:36 Page 5
To Next Page
Loading...
