17
ENCOTTAGE CHEESE FUNCTION
PORRIDGE FUNCTION
This function makes soft cheese. For best results, you should make
cottage cheese from kefir without adding special ferments. You get
around 200-250g of cottage cheese from 1l of Kefir. Add kefir in the bowl.
• Press the “Menu” key to select the function «Cheese». The screen
displays the default cooking time, the “Start” light will flash red.
• Press “Start” key. The multicooker will start the “Cheese” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” 5 times.
Note: There is no keep warm function for this program
• Press “Menu” key to select the function “Porridge”. The screen displays
the default cooking time, the “Start” light will flash red.
• You can change the cooking time by pressing “Timer” key first and then
press “+” and “-” keys. Press “Temperature” key and then press “+” and “-”
keys to adjust the temperature.
• Press “Start” key. The multicooker will start the “Porridge” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
• At the end of cooking, the multicooker will “beep” 5 times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
To Next Page
Loading...
