TEFAL EXPERTCOOK - Diy Function; Keep Warm; Cancel Function

22
DIY FUNCTION
KEEP WARM / CANCEL FUNCTION
• “Do It Yourself” function is to memorise your favourite cooking choices.
• Press “DIY” key when the multicooker is in standby mode to start the
DIY setting. The screen will display the default cooking time, and the
“Start” light will flash.
• You can change the cooking time by pressing “Timer” key first and then
press “+” and “-” keys. Press “Temperature” key and then press “+” and “-”
keys to adjust the temperature.
• At the end of cooking, the multicooker will beep 5 times.
Note:
The multicooker memorises the last temperature and cooking time
DIY setting for your next use.
• Press the “Keep Warm / Cancel key when the multicooker is in standby
mode to begin the keep warm program. The “Keep Warm / Cancel” light
will turn on and the screen will display the time for which the keep warm
function has been active.
• Press the “Keep warm / Cancel” key when the multicooker is in a program
to reset the settings and go back to Standby mode.
• You can remove the automatic keep warm function for the next cooking
program by pressing the “Keep warm/Cancel” key for 5 seconds in the
function which can enter the “Keep warm” function automatically and
the “Keep warm / Cancel” light will go off.
• The maximum keep warm time is 12 hours.
Recommendation:
In order to preserve the taste of your food, keep warm function should
not exceed 12 hours.