24
Cleaning the inner lid
• Remove the inner lid by pushing outwards with both hands. Clean it with
a sponge and washing up liquid (fig.15). Then wipe dry and put it back
behind the 2 ribs and push it on the top until it’s fixed.
Cleaning and care of the other parts of the appliance
• Clean the outside of the multicooker – fig.16, the inside of the lid and
the cord with a damp cloth and wipe dry. Do not use abrasive products.
• Do not use water to clean the interior of the appliance body as it could
damage the heat sensor.
Malfunction
description
Causes Solutions
Any indicator lights
off and no heating.
Appliance not
plugged in.
Check the appliance is plugged
in the socket, and is switched on.
Any indicator lights
off and heating.
Problem of the connection of
the indicator light or indicator
light is damaged.
Send to authorized service center
for repair.
Steam leakage
during using
Lid is badly closed. Open and close the lid again.
Micro pressure valve not well
positioned or assembled
incorrectly.
Stop the cooking (unplug the
product) and check the valve
is correctly assembled (2parts
locked together) and well
positioned.
Lid or micro pressure valve
gasket is damaged.
Send to authorized service center
for repair.
Rice undercooked or
overcooked.
Too much or not enough
water compared to rice
quantity.
Refer to table for water quantity.
TECHNICAL TROUBLESHOOTING GUIDE
To Next Page
Loading...
