(*) Depending on model
14
In order to avoid water being added to the oil :
• Please respect carefully the safety and usage recommendations
contained in the Instructions For Use.
• Use your fryer away from water splashes.
• Dry the food thoroughly before cooking.
• Make sure that the filter is clean, so as to always allow the free circulation
of the steam.
• When you open the lid, be careful not to let the condensation drops fall
into the oil.
• Ensure that the oil box is clean and dry before draining and filtering the
oil.(*)
• Never store the oil box full of oil in the refrigerator.(*)
• Always store the oil box in the horizontal position, with lid closed, in a
dry place.(*)
• After each cleaning of the bowl, press on the valve of the oil filtration
system located under the bowl.(*)
• Dry all the cleaned parts thoroughly before reassembling and storing
the fryer.
• Never store your deep fryer outside. Choose a dry and well-ventilated
place.
RESET FUNCTION
• Your appliance is equipped with an overheating security feature located in the
back of the control unit.
• If you use your fryer without oil the safety cut-off is activated and the appliance
will shut off automatically.
• In this case, unplug the appliance and let it cool (about 30 minutes).
• After the bowl has been filled with oil, plug the appliance in. Then press the safety
cut-off RESET button with a toothpick or similar non-metallic object – fig.15.
• If the problem with the safety cut-off persists, please contact our Helpline (see
details on page 18).
IMPORTANT
To Next Page
Loading...
