1212
Cooking
14-15
After pre-heating, the appliance is ready
for use. Open the grill and place the food
on the cooking plate.
Comments:
if the appliance remains open
for too long, the safety system will turn off
the appliance automatically.
14 15
16-17
The appliance automatically adjusts the
cooking cycle (time and temperature)
according to the food thickness and
quantity.
Close the appliance to start the cooking cycle.
The indicator “Rare” is flashing to indicate
that the rare cooking level is in progress. A
beep is heard and the indicator becomes
lighted fixed once the level of cooking is
reached
(for the best results do not open
or move your food during the cooking
process).
Please note, especially on meat, it is normal
that cooking result vary depending on type,
quality and origin of food.
Note:
for thinly-cut food, after close the device,
the button «
OK
» is blinking and remain on
«
pre heating fixed
». Press «
OK
» to enable
the appliance to recognize the food to be cooked
and launch the cooking program.
16 17
18 19
18-19
When the cooking level is reached, the
lights indicator stop blinking and you can hear a
« beep ». The next cooking is blinking until to be
reached. Open the appliance and remove your
food when the desired level is reached.
20
Close the appliance without food on plate.
The control panel will light up and set itself to
‘choice of program’ mode.
Restart to n°9 for a new cooking cycle in
automatic mode.
Comment:
the security system will turn off
automatically if no program selection is
made.
20
To Next Page
Loading...
Need help?
General