19
Taking care of the bowl
• For the bowl, carefully follow the instructions below:
• To avoid damaging the non-stick coating of the bowl do not cut food
in it.
• Make sure you put the bowl back into the multicooker
• Use the plastic spoon provided or a wooden spoon and not a metal type
so as to avoid damaging the bowl surface – fig.15.
• To avoid any risk of corrosion, do not pour vinegar into the bowl.
• The colour of the bowl surface may change after using for the first time or
after longer use. This change in colour is due to the action of steam and
water and does not have any effect on the use of the multicooker, nor is it
dangerous for your health. It is perfectly safe to continue using it.
• Do not use a handblender directly in the non-stick bowl to blend foods.
Cleaning the micro pressure valve
• When cleaning the micro-pressure valve, please remove it from the lid
– fig.16 and open it by rotating in the direction of “open” – fig.17a and
17b. After cleaning it, please wipe it dry and match the two triangles in
the two parts together and rotate it in the direction of “close”, then put
it back to the lid of the multicooker – fig.18a and 18b.
Cleaning and care of the other parts of the appliance
• Unplug the appliance before cleaning.
• Clean the outside of the multicooker – fig.19, the inside of the lid –
fig.14 and the cord with a damp cloth and wipe dry. Do not use abrasive
products.
• Do not use water to clean the interior of the appliance body as it could
damage the heat sensor.
TECHNICAL TROUBLESHOOTING GUIDE
Malfunction
description
Causes Solutions
Control panel lights
off and no heating.
Appliance not plugged in.
Plug in the appliance at the
mains socket.
Control panel lights
off and heating.
Problem of the connection of the
indicator light or indicator light is
damaged.
Send to an authorised service
centre for repair.
To Next Page
Loading...
