11
“REHEAT” FUNCTION
“RISOTTO” FUNCTION
• This function is intended to only reheat cooked food. Place the food in
the bowl.
• Press the “Menu” button and scroll through to select “Reheat”. The
screen displays “25” and the “Start” button flashes.
• The default cooking time is 25 minutes adjustable from a minimum of
8 minutes to a maximum of 45 minutes. A long press on the +/- key
will allow you to increase or decrease the time without the appliance
beeping.
• Press the “Start” button and the multicooker enters into “Reheat”
mode. The “Start” light stops flashing and the screen display shows the
remaining reheating time.
• At the end of reheating process, the buzzer will sound several times, the
multicooker will enter keep warm mode with the “Keep Warm” button
turning on and the screen will display “b”.
• Press the “Menu” button and scroll through to select “Risotto”. The
screen displays “--” and the “Start” button flashes. Press the “Start”
button and the multicooker enters into “Risotto” mode. The “Start” light
stops flashing and the screen display shows “-”.
• The rice cooker automatically determines the cooking time depending
on the quantity of rice and water placed in the bowl.
• The cooking time is automatically followed by a simmering phase.
At the end of the cooking phase, the buzzer beeps twice, and the
multicooker will start the ‘simmering phase’. The screen will count down
the simmering time from 10 minutes.
• After simmering, the buzzer will sound several times, the multicooker will
enter keep warm status with the “Keep Warm” button turning on and
the screen will display “b”.
• Stir the risotto with the spatula before serving.
• After simmering, the buzzer will sound several times, the multicooker will
enter keep warm status with the “Keep Warm” indicator turning on and
the screen will display “b”.
• Stir the rice with the spatula before serving to separate and fluff up the
grains of rice.