Tefcold LDP900F - User Manual

Questions and Answers

J
James AdamsAug 3, 2025
Why is the temperature of my Tefcold LDP900F Freezer too high?
- M
  Miss Sherry NelsonAug 4, 2025
  If the cabinet temperature of your Tefcold Freezer is too high, several factors could be the cause. First, ensure that the freezer isn't near any heat sources; if it is, move either the freezer or the heat source. Check for frost buildup, and if present, defrost the freezer manually. Overcrowding can also be a factor; remove some items to ensure that the air inlet and outlet are not blocked. Other potential issues include refrigerant leaks, which would require you to check for leaks and refill the refrigerant, a contaminated condenser (clean the dust-hood), fan failure (repair or replace the fan), temperature controller failure (replace the temperature controller), or the temperature control probe touching the bottom (replace the position of temperature control probe).
M
Michael PhillipsAug 9, 2025
What to do if the compressor is not running in my Tefcold Freezer?
- D
  Daniel WallaceAug 9, 2025
  If your Tefcold Freezer's compressor isn't running, it could be due to several reasons. The voltage might be outside the acceptable range; in this case, use a voltage regulator and connect it to an appropriate power supply. Alternatively, the temperature controller might have failed, requiring a replacement. In more serious cases, the compressor itself might be damaged and need replacing.
R
roberttaylorAug 15, 2025
How to reduce noise from Tefcold LDP900F Freezer?
- B
  barronpatrickAug 15, 2025
  If your Tefcold Freezer is making too much noise, start by checking if the unit is placed on a level surface. If not, adjust the feet to stabilize it. Also, inspect the set screws on the fans and compressor to ensure they are tightened.
P
Pamela AyersAug 21, 2025
Why is the light not working in my Tefcold Freezer?
- D
  Diana MooreAug 21, 2025
  If the light in your Tefcold Freezer isn't working, first ensure that the switch is turned on. If it is on, check the wire connections to make sure they are secure. If the connections are good, the light power supply might be damaged, requiring a replacement. Finally, the light itself may be damaged and need replacing.
V
Valerie AndersonAug 27, 2025
What to do if my Tefcold LDP900F has no power?
- T
  Timothy RobertsonAug 27, 2025
  If your Tefcold Freezer isn't getting power, the issue might be with the socket. Check for poor contact and repair or replace the socket if needed. Additionally, inspect the input control wire for any failures and repair them.

Summary

Precaution

Transportation and Handling

Installation and Operation

Maintenance

Troubleshooting

Structure Diagram

Circuit Diagram

Setting of the Digital Controller

Major Technical Parameters

Disposal of the Product

Warranty Information

Tefcold LDP900F Specifications

General

Model	LDP900F
Category	Freezer
Type	Upright Freezer
Energy Efficiency Class	A+
Climate Class	SN-T
Refrigerant	R290
Defrosting	Manual
Lock	Yes
Number of Doors	1
Color	White
Installation Type	Free Standing
Power Supply	220-240V, 50Hz