Why my Tefcold Chiller does not start?
If your Tefcold Chiller isn't starting, there could be a few reasons. First, check the power supply cable to ensure it's properly connected and providing voltage. Also, check the fuses and verify the correct connection of the appliance to the power source. If these steps don't resolve the issue, it may require professional assistance.
What to do if Tefcold Chiller is cooling insufficiently?
If your Tefcold Chiller is running continuously but not cooling enough, here are some things to check: * Make sure the room isn't too hot; air out the environment to lower the ambient temperature. * Inspect the condenser for any dirt buildup and clean it if necessary. * Examine the door gaskets to ensure they are sealing properly. If these steps don't resolve the issue, it may require professional assistance.
Why won't my Tefcold Chiller stop running?
If your Tefcold Chiller is constantly running and won't stop, it could be due to a probe or circuit board fault, which requires professional assistance.
How to remove ice inside the evaporator of Tefcold Chiller?
If there's ice inside the evaporator of your Tefcold Chiller, try performing a defrosting cycle, possibly with the door open. If the problem continues, it may require professional assistance.
How to fix a noisy Tefcold Chiller?
To address noise from your Tefcold Chiller, check for any contact between the appliance and other objects, both inside and outside, as persistent vibrations can cause noise.
General guidelines for cleaning and maintaining the appliance's parts.
Guidelines for selecting the installation area and preparing connections.
Instructions for safely connecting the appliance to the mains power.
Details on parameters that can be configured for each cycle phase.
Procedure for transferring parameters from the Hot Key to the instrument.
Procedure for transferring parameters from the instrument to the Hot Key.
General guidelines for cleaning and maintaining the appliance's parts.
Guidelines for selecting the installation area and preparing connections.
Instructions for safely connecting the appliance to the mains power.
Details on parameters that can be configured for each cycle phase.
Procedure for transferring parameters from the Hot Key to the instrument.
Procedure for transferring parameters from the instrument to the Hot Key.
General| Category | Freezer |
|---|---|
| Type | Upright Freezer |
| Temperature Range | -18°C to -24°C |
| Refrigerant | R600a |
| Energy Class | A+ |
| Noise Level | 42 dB |
| Color | White |
| Capacity | 100 liters |
To Next Page
