Teka CLC User Manual

6
7
even if switched off by turning the knob
(A7) to the left or right.
Important! Do not look at the lights di-
rectly or using an optical instrument.
BUILT-IN INSTALLATION
Verify the minimum measurements required for
correct installation of the appliance.
The coffee maker must be installed in a column
and the column must be firmly fixed to the wall
with commercially available brackets.
Important:
• Important: all installation or maintenance
operations must be performed with the ap-
pliance disconnected from the mains electri-
city supply.
• Kitchenfurnitureindirectcontactwiththe
appliance must be heat resistant (65°C min).
• Toguaranteecorrectventilation,leaveagap
at the bottom of the cabinet (see measure-
ments in figure).
200 cm
2
45 mm
45 mm
45 mm
45 mm
45 mm
45 mm
45 mm
45 mm
450
850 mm
500 mm
550 mm Min.
560 mm
200 cm
2
455 mm
595 mm
22 mm
361 mm
528 mm
372 mm
30 mm
200 cm
2
45 mm
45 mm
45 mm
45 mm
45 mm
45 mm
45 mm
45 mm
450
850 mm
500 mm
550 mm Min.
560 mm
200 cm
2
455 mm
595 mm
22 mm
361 mm
528 mm
372 mm
30 mm

Teka CLC Specifications

General

Brand	Teka
Model	CLC
Category	Coffee Maker
Language	English