Teka HKS 930 S

21
EN
Technical characteristics
Displays
Display
Description
Descaling
SOFT
Soft water.
MED
Medium water.
HARD
Hard water.
CAL
Appliance must be descaled.
Flashing – descaling starts.
0.5L
Feed 0.5 litre descaling solution into the water tank.
1.0L
Feed 1 litre cold water into the water tank for rinsing.
Water tank
Indication that water tank is missing.
The water tank must be removed, emptied and reinserted.
Steam reduction
END
End of a cooking cycle.
VAP
Indication that steam reduction process is ongoing.
PUMP
Indication that cold water is entering the boiler and hot water is being pumped to the
water tank.
FULL
The water tank must be removed, emptied and reinserted.
System warnings
Temperature in the PCB is too high.
Specifications
 AC Voltage .......................................................................................... (see characteristics plate)
 Power required .................................................................................... 1500 W
 Exterior dimensions (WHD). ............................................................ 595  455  472 mm
 Interior dimensions (WHD). ............................................................. 420  210  390 mm
 Oven capacity. ..................................................................................... 35 l
 Weight ................................................................................................. 32 kg