To Next PageTo Next Page
Need help?Do you have a question about the Teka VTC DC and is the answer not in the manual?
General| Type | Induction |
|---|---|
| Width | 60 cm |
| Control type | Touch |
| Timer | Yes |
| Power levels | 9 |
| Built-in Hob | Yes |
| Power Source | Electric |
| Residual Heat Indicator | Yes |
| Safety features | Child lock |
| Material | Ceramic glass |
| Dimensions (W x D x H) | 590 x 520 x 50 mm |
Important safety guidelines for installation and use of the appliance.
Guidelines for placing the hob correctly in the kitchen unit.
Specific installation advice for units with drawers or low cupboards.
Details on the required dimensions for cutting holes for hob installation.
Guidance on placing the oven or control panel relative to the hob.
Instructions on how to securely attach the hob to the worktop.
Procedures and safety for connecting the hob to the gas supply.
Steps for safely connecting the hob to the electrical mains.
How to connect the hob with the oven or control panel using telescopic shafts.
Information and warnings regarding converting the appliance to different gas types.
Overview of hob dimensions and technical specifications for various models.
General characteristics applicable to all hob models.
Specific technical features and warnings for the VT DUAL.1 model.
Preparations and checks needed before operating the hob for the first time.
How to operate the hob using the touch-sensitive controls.
Steps for turning off individual hotplates safely and efficiently.
Explanation of the indicator showing when a hotplate is still hot.
How to turn off the entire hob appliance.
Information on using the dual and triple circuit hotplate features.
Instructions for activating the double and triple circuit hotplates.
How to turn off the inner or outer ring of a double hotplate.
Procedure to disconnect rings on the triple hotplate model.
How to activate child safety lock for hob controls.
Details on the safety lock activation for specific models.
How to deactivate the hob's sensor blocking.
How to permanently disable the hob's safety lock.
Automatic disconnection feature for safety.
Using the hob to start cooking automatically at a set time.
Adjusting the power level while using the remote cooking feature.
How to stop the remote cooking function.
Using the timer to automatically switch off hotplates.
How to set the clock for timing functions.
Steps to cancel the active clock timer for a hotplate.
Quick method to turn off the clock timer.
Setting a timer for a specific hotplate.
How to modify an already set timer.
Quick method to turn off the countdown counter.
Using the clock as a general countdown timer.
How to activate the clock as a countdown counter.
How to stop the countdown counter.
Information on how power surges affect the hob and its operation.
General instructions for operating the glass ceramic cooking zones.
Specific operating methods for double circuit hotplates.
Explanation of the indicators for residual heat on the hob.
Guidelines for optimal use and best results with ceramic hotplates.
Recommended methods and products for cleaning the hob.
Tips and warnings for maintaining the glass surface of the hob.
Instructions for cleaning and maintaining the hob's surround.
Description of the safety feature preventing accidental burner activation.
Specific instructions for lighting the burners on the VT DUAL.1 model.
Tips to maximize performance and energy efficiency of burners.
Methods for cleaning the hob's burners and associated parts.
Maintenance procedures specific to the VT DUAL.1 model.
