Teknatool nova PRO-TEK SUPERNOVA2 - PRO-TEK SUPERNOVA2 Chuck Types; Insert Thread Model (SKU 23262); Direct Thread Model (SKU 23261)

9
PRO-TEK SUPERNOVA
2
Chuck – Types
There are two models to the PRO-TEK SUPERNOVA
2
chuck to meet various wood
turning requirements. Please check the contents of your box to ensure you have the
model intended to purchase.
Note:
Inserts, accessories, jaw sets etc. are fully interchangeable between the NOVA G3,
SUPERNOVA, SUPERNOVA
2
, Titan III, PRO-TEK G3 and PRO-TEK SUPERNOVA2 Chucks.
The only exceptions are the Infinity model jaw slides and jaws that are exclusive to
the NOVA Titan chuck.
INSERT THREAD MODEL (SKU 23262)
Standard Accessory Kit:
1x Nickel Plated Chuck body
1x Tilt
-away T-Handle
1x
PRO-TEK 50mm Serrated Jaw Set
1x M6 Grub screw
2x Fiber washers
1x
Hex Key
8x M6x10 Star Jaw screws
1x
Star T handle
1x
Safe Lock Woodworm Screw
1x Workshop cloth
1x Quick Start Manual
DIRECT THREAD MODEL (SKU 23261)
Standard Accessory Kit:
1x
Nickel Plated Chuck body
1x Tilt
-away T-Handle
1x
PRO-TEK 50mm Serrated Jaw Set
1x M6 Grub Screw
2x Fiber washers
1x Hex Key
8x M6x10
Star Jaw screws
1x Star T handle
1x Safe Lock Woodworm Screw
1x Workshop Cloth
1x Quick Start Manual